Everything you need to know about refrigeration Cold Room Evaporator for Sale
Cold Room Evaporator for Sale play a fundamental role in any refrigeration or freezing system, whether incorporated in a compact system or as a stand-alone unit
The refrigeration evaporator is the name given to any heat exchanger where the refrigerant evaporates at low temperature and therefore at low pressure, but usually above atmospheric pressure to prevent gas and/or water vapor leakages into the low-pressure circuit.
Types of refrigeration evaporators
We can make different classifications of Cold Room Evaporator for Sale; among them, we differentiate:
Depending on the medium to cool:
Air – Refrigerant:
these uses in direct expansion systems and in most cold rooms. In these systems, our equipment directly cools the ambient air.
Refrigerant – Refrigerant:
These are mainly in cascade systems, where the condensing and evaporating temperature differences are very high. This process is mainly in two stages, forming two complete refrigeration systems.
liquid – Refrigerant:
We use this when the medium to cool is a liquid and we usually use in indirect systems or food refrigeration processes.
Depending on refrigerant outlet conditions:
Flooded:
this type of evaporator uses in two-stage systems with partial or total injection and in systems with a liquid separator at the outlet. In these evaporators, the refrigerant inside the evaporator does not evaporate completely, and at the outlet of the evaporator there is a two-phase mixture with very good heat transfer.
Dry:
These are the most common and are found in most refrigeration installations. In them, the refrigerant evaporates completely inside the
evaporator and there is often superheating of the vapor generated.
According to their constructive characteristics:
Plain:
these are common in domestic refrigerators and refrigerated chests. They form the refrigeration circuit itself by joining two metal sheets that have been previously pre-formed so that the refrigerant circulates inside them.
Tubes and fins:
these are common in cold rooms, mainly in refrigerant-air evaporators. The refrigerant evaporates inside the tubes that are in contact with the thin metal sheets.
Plates:
these use in refrigerant-liquid or refrigerant-refrigerant evaporators. Their operation is based on separating both fluids by a copper, aluminum or steel plate, which acts as a conductive agent.
Uncovered tubes:
these use to cool a liquid by installing a bare tube, inside which the refrigerant evaporates.
Coaxial tubes:
We make this using one or more tubes inside a jacket and are responsible for cooling the liquid.
Casing – Tubes:
commonly in use, in which the refrigerant circulates inside the tubes and the liquid cools as it circulates inside the casing.
